ATV71HU15N4 Schneider Inverter Drive ATV71 Speed Drive 1.5kW

ATV71HU15N4 Schneider Inverter Drive ATV71 Speed Drive 1.5kW

Model Number:

Product Type:

Type:Industry Automation

Category:Home/Inverters/Schneider/ATV71

Plance of Origin:Assembled in China

Warranty:All parts new or reconditioned are covered by AoteWell 12 month warranty

Description:ATV71HU15N4 Schneider Inverter Drive ATV71 Speed Drive 1.5kW 2HP – 480V – EMC filter-graphic terminal 1.5 kW at 380…480 V 3 phases  

ATV71HU15N4 Schneider Inverter Drive ATV71 Speed Drive 1.5kW 2HP

Main
range of product
Altivar 71
product or component type
Variable speed drive
product specific application
Complex, high-power machines
component name
ATV71
motor power kW
1.5 kW at 380…480 V 3 phases
motor power hp
2 hp at 380…480 V 3 phases
motor cable length
<= 50 m Shielded cable <= 100 m Unshielded cable
[Us] rated supply voltage
380…480 V (- 15…10 %)
network number of phases
3 phases
line current
5.3 A for 480 V 3 phases 1.5 kW / 2 hp 5.8 A for 380 V 3 phases 1.5 kW / 2 hp
EMC filter
Integrated
assembly style
With heat sink
apparent power
3.8 kVA at 380 V 3 phases 1.5 kW / 2 hp
prospective line Isc
<= 5 kA, 3 phases
nominal output current
3.4 A at 4 kHz 460 V 3 phases 1.5 kW / 2 hp 4.1 A at 4 kHz 380 V 3 phases 1.5 kW / 2 hp
maximum transient current
6.2 A for 60 s 3 phases 1.5 kW / 2 hp 6.8 A for 2 s 3 phases 1.5 kW / 2 hp
output frequency
0.1…599 Hz
nominal switching frequency
4 kHz
switching frequency
1…16 kHz adjustable 4…16 kHz with derating factor
asynchronous motor control profile
ENA (Energy adaptation) system for unbalanced loads Sensorless flux vector control (SFVC) (voltage or current vector) Flux vector control (FVC) with sensor (current vector) Voltage/frequency ratio (2 or 5 points)
type of polarization
No impedance for Modbus
Complementary
product destination
Asynchronous motors Synchronous motors
supply voltage limits
323…528 V
supply frequency
50…60 Hz (- 5…5 %)
network frequency
47.5…63 Hz
speed range
1…100 for asynchronous motor in open-loop mode, without speed feedback 1…50 for synchronous motor in open-loop mode, without speed feedback 1…1000 for asynchronous motor in closed-loop mode with encoder feedback
speed accuracy
+/- 0.01 % of nominal speed for 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback
torque accuracy
+/- 15 % in open-loop mode, without speed feedback +/- 5 % in closed-loop mode with encoder feedback
transient overtorque
220 % of nominal motor torque +/- 10 % for 2 s 170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes
braking torque
<= 150 % with braking or hoist resistor 30 % without braking resistor
synchronous motor control profile
Vector control without speed feedback
regulation loop
Adjustable PI regulator
motor slip compensation
Adjustable Suppressable Automatic whatever the load Not available in voltage/frequency ratio (2 or 5 points)
local signalling
1 LED red presence of drive voltage
output voltage
<= power supply voltage
insulation
Electrical between power and control
type of cable
With a NEMA Type1 kit : 3-strand UL 508 cable at 40 °C, copper 75 °C PVC With an IP21 or an IP31 kit : 3-strand IEC cable at 40 °C, copper 70 °C PVC Without mounting kit : 1-strand IEC cable at 45 °C, copper 70 °C PVC Without mounting kit : 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR
electrical connection
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1…LI6, PWR terminal 2.5 mm² / AWG 14 L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 4 mm² / AWG 10
tightening torque
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1…LI6, PWR 0.6 N.m L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 1.4 N.m / 12.3 lb.in
supply
Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protection Internal supply, 24 V DC, voltage limits 21…27 V, <= 200 mA for overload and short-circuit protection
analogue input number
2
analogue input type
AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign AI2 software-configurable current 0…20 mA, impedance 242 Ohm, resolution 11 bits AI2 software-configurable voltage 0…10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
sampling duration
AI1-/Al1+ 2 ms, +/- 0.5 ms for analog input(s) Al2 2 ms, +/- 0.5 ms for analog input(s) LI1…LI5 2 ms, +/- 0.5 ms for discrete input(s) LI6 (if configured as logic input) 2 ms, +/- 0.5 ms for discrete input(s)
response time
<= 100 ms in STO (Safe Torque Off) AO1 2 ms, tolerance +/- 0.5 ms for analog output(s) R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s) R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)
accuracy
AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °C AI2 +/- 0.6 % for a temperature variation 60 °C AO1 +/- 1 % for a temperature variation 60 °C
linearity error
AI1-/Al1+, AI2 +/- 0.15 % of maximum value AO1 +/- 0.2 %
analogue output number
1
analogue output type
AO1 software-configurable current 0…20 mA, impedance 500 Ohm, resolution 10 bits AO1 software-configurable logic output 10 V <= 20 mA AO1 software-configurable voltage 0…10 V DC, impedance 470 Ohm, resolution 10 bits
discrete output number
2
discrete output type
R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles R2A, R2B configurable relay logic NO, electrical durability 100000 cycles
minimum switching current
Configurable relay logic 3 mA at 24 V DC
maximum switching current
R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, R1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, R1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4,
discrete input number
7
discrete input type
LI6 : switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm PWR : safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d LI1…LI5 : programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm LI6 : switch-configurable PTC probe 0…6, impedance: 1500 Ohm
discrete input logic
LI1…LI5 positive logic (source), < 5 V (state 0), > 11 V (state 0) LI1…LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 0) LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 0) LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 0)
acceleration and deceleration ramps
Linear adjustable separately from 0.01 to 9000 s Automatic adaptation of ramp if braking capacity exceeded, by using resistor S, U or customized
braking to standstill
By DC injection
protection type
Drive against exceeding limit speed Drive against input phase loss Drive break on the control circuit Drive input phase breaks Drive line supply overvoltage Drive line supply undervoltage Drive overcurrent between output phases and earth Drive overheating protection Drive overvoltages on the DC bus Drive short-circuit between motor phases Drive thermal protection Motor motor phase break Motor power removal Motor thermal protection
insulation resistance
> 1 mOhm at 500 V DC for 1 minute to earth
frequency resolution
Analog input 0.024/50 Hz Display unit 0.1 Hz
communication port protocol
CANopen Modbus
connector type
1 RJ45 for Modbus on front face 1 RJ45 for Modbus on terminal Male SUB-D 9 on RJ45 for CANopen
physical interface
2-wire RS 485 for Modbus
transmission frame
RTU for Modbus
transmission rate
20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal 9600 bps, 19200 bps for Modbus on front face
data format
8 bits, 1 stop, even parity for Modbus on front face 8 bits, odd even or no configurable parity for Modbus on terminal
number of addresses
1…247 for Modbus 1…127 for CANopen
method of access
Slave for CANopen
marking
CE
operating position
Vertical +/- 10 degree
height
230 mm
depth
175 mm
width
130 mm
product weight
3 kg
functionality
Full
specific application
Other applications
option card
CC-Link communication card Controller inside programmable card DeviceNet communication card Ethernet/IP communication card Fipio communication card I/O extension card Interbus-S communication card Interface card for encoder Modbus Plus communication card Modbus TCP communication card Modbus/Uni-Telway communication card Overhead crane card Profibus DP communication card Profibus DP V1 communication card
Environment
noise level
43 dB conforming to 86/188/EEC
dielectric strength
3535 V DC between earth and power terminals 5092 V DC between control and power terminals
electromagnetic compatibility
Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3 Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4 Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3 Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 1.2/50 µs – 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
standards
EN/IEC 61800-3 EN 55011 class A group 1 UL Type 1 EN 61800-3 environments 2 category C2 EN/IEC 61800-5-1 IEC 60721-3-3 class 3S2 IEC 60721-3-3 class 3C1 EN 61800-3 environments 1 category C2
product certifications
CSA C-Tick GOST UL NOM 117
pollution degree
2 conforming to EN/IEC 61800-5-1
IP degree of protection
IP20
vibration resistance
1.5 mm peak to peak (f = 3…13 Hz) conforming to EN/IEC 60068-2-6 1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity
5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3
ambient air temperature for operation
-10…50 °C without derating
ambient air temperature for storage
-25…70 °C
operating altitude
<= 1000 m without derating 1000…3000 m with current derating 1 % per 100 m