4PP420.1043-75
MATERIAL NUMBER:
4PP420.1043-75
DESCRIPTION:
Power Panel PP420; 10.4″ VGA color TFT display with touch screen (resistive); 1 aPCI slot; 128 MB SDRAM; 512 KB SRAM; CompactFlash slot (type I); ETH 10/100; RS232; 2x USB; IP65 protection (front side); 24 VDC (0TB103.9 screw clamp or 0TB103.91 cage clamp must be ordered separately).
General information
LEDs | Power/User, CF |
B&R ID code | 0x23BD |
Battery | |
Type | Renata 950 mAh |
Service life | 3 years |
Removable | Yes, accessible from the outside |
Backup capacitor | |
Buffer time | 10 min |
Variant | Lithium Ion |
Power button | Yes |
Reset button | Yes |
Certifications | |
CE | |
UL | |
EAC | Yes |
KC | Yes |
Controller
Bootloader | Automation Runtime |
Processor | |
Type | Geode LX800 |
Clock frequency | 500 MHz |
L1 cache | 128 kB (64 kB I-Cache / 64 kB D-Cache) |
L2 cache | 128 kB |
Expanded command set | MMX technology, 3D Now |
Floating point unit (FPU) | Yes |
Flash | 2 MB (for firmware) |
Cooling | Passive via heat sink |
Mode/Node switches | 2, 16 digits each |
Watchdog | MTCX |
Real-time clock | |
Accuracy | At 25°C: typ. 30 ppm (2.5 seconds) per day |
Battery-backed | Yes |
Power failure logic | |
Controller | MTCX |
Buffer time | 10 ms |
Graphics | |
Controller | Geode LX800 |
Memory | 8 MB shared memory (reserved by main memory) |
SRAM | |
Size | 512 kB |
Battery-backed | Yes |
Display
Type | Color TFT |
Diagonal | 10.4″ (264 mm) |
Colors | 262144 |
Resolution | VGA, 640 x 480 pixels |
Contrast | 900:1 |
Viewing angles | |
Horizontal | Direction R = 80° / Direction L = 80° |
Vertical | Direction U = 80° / Direction D = 80° |
Backlight | |
Type | LED |
Brightness | 450 cd/m² |
Half-brightness time | 70,000 h |
Filter glass | |
Transmittance | – |
Anti-glare coating | – |
Touch screen | |
Type | AMT |
Technology | Analog, resistive |
Controller | Elo, serial, 12-bit |
Transmittance | Up to 80% ±5% |
Interfaces
COM1 | |
Type | RS232, modem-capable, not electrically isolated |
Variant | 9-pin DSUB plug |
UART | 16C550 compatible, 16-byte FIFO |
Max. baud rate | 115 kbit/s |
CompactFlash slot 1 | |
Type | Type I |
USB | |
Quantity | 2 |
Type | USB 1.1, USB 2.0 |
Variant | Type A |
Transfer rate | Low speed (1.5 Mbit/s), full speed (12 Mbit/s), high speed (480 Mbit/s) |
Current-carrying capacity | Max. 500mA per connection |
Ethernet | |
Quantity | 1 |
Controller | Intel 82551ER |
Transfer rate | 10/100 Mbit/s |
Max. baud rate | 100 Mbit/s |
Keys
Function keys | No |
Soft keys | No |
System keys | No |
Service life | – |
LED luminous intensity | – |
Slots
aPCI slots | 1 |
Electrical properties
Nominal voltage | 18 to 30 VDC |
Nominal current | 0.71 A |
Bleeder resistance | 0 Ω |
Inrush current | Max. 2.8 A |
Power consumption | Typ. 17 W |
Galvanic isolation | Yes |
Operating conditions
Degree of protection per EN 60529 | IP20 on back (only with inserted CF card, aPCI board or optional aPCI cover) IP65 / NEMA 250 type 4X indoor, dust and sprayed water protection (front side) |
Ambient conditions
Temperature | |
Operation | 0 to 50°C |
Storage | -20 to 70°C |
Transport | -20 to 70°C |
Vibration | |
Operation (continuous) | 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g |
Operation (occasional) | 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g |
Storage | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
Transport | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
Shock | |
Operation | 15 g, 11 ms |
Storage | 30 g, 15 ms |
Transport | 30 g, 15 ms |
Elevation | |
Operation | Max. 3000 m |
Mechanical properties
Housing | |
Material | Metal |
Front | |
Frame | Naturally anodized aluminum |
Design | Gray |
Panel overlay | |
Material | Polyester |
Light background color | Similar to Pantone 427CV |
Dark border color around display | Similar to Pantone432CV |
Gasket | Flat gasket around display front |
Dimensions | |
Width | 323 mm |
Height | 260 mm |
Depth | 86 mm |
Weight | 3900 g |