Rosemount 2090P Pressure Transmitter 2090PG2S22C1M5Q4
Rosemount™
2090P Pulp and Paper Pressure
Transmitter
Kevin@aotewell.com
Whatsapp:+86 159 1408 1759 24/7 Customer Support
Rosemount 2088 Gage & Absolute Pressure Transmitters 2088G1S22A2I1B4Q4 Rosemount 2088 Series Pressure Transmitters
Rosemount 2088 Gage & Absolute Pressure Transmitters
| Rosemount 2088 Pressure Transmitter |
|
• Available protocols include 4-20 mA HART and 1-5 Vdc |
Rosemount Transmitter ，Rosemount 3051 Pressure Transmittre
Rosemount 3051 Pressure Transmitters
Rosemount 3051 Pressure Transmitters With its time-tested reliability and over 7 million installations, the Rosemount 3051 is more than field proven – it is the Industry Standard.
The 3051 delivers unparalleled reliability, performance and safety to increase your plant profitability. Better measurement means a stronger bottom line. The comprehensive offering enhances your pressure, level and flow applications from simple measurement to stringent SIL2 safety compliance.
The Rosemount 3051S Series of Instrumentation will maximize your success through faster start-ups, reduced operating costs, and higher efficiency and productivity. With the latest Smart Wireless, MultiVariable and Advanced Diagnostics technologies, the 3051S does more than measure pressure.
Pressure Transmitters Emerson Process Management, the undisputed leader of industrial instrumentation, proudly provides the broadest array of pressure measurement products for pressure, flow and level applications.
3051 transmitter 2088 transmitter 2051 transmitter
What is a Rosemount Transmitter?
In industrial process control, a “Rosemount Transmitter” is any device which converts measurements from a sensor into a signal, conditions it, to be received, usually sent via wires, by some display or control device located a distance away. Typically in process control applications the “transmitter” will output an analog 4-20 mA current loop or digital protocol to represent a measured variable within a range. For example, a pressure transmitter might use 4 mA as a representation for 50 psig of pressure and 20 mA as 1000 psig of pressure and any value in between proportionately ranged between 50 and 1000 psig. (A 0-4 mA signal indicates a system error.) Older technology transmitters used pneumatic pressure typically ranged between 3 to 15 psig (20 to 100 kPa) to represent a process variable.
Rosemount 3051S Series of Instrumentation
The Rosemount 3051S is the first scalable device that provides a foundation for integrated pressure, flow, and level solutions.
Rosemount MultiVariable Transmitters
Rosemount MultiVariable Transmitters measure differential pressure, static pressure, and process temperature simultaneously to provide real-time fully compensated mass, energy, and totalized flow.
Rosemount 3051 Pressure Transmitters
The Rosemount 3051 is the industry’s standard for pressure, level and flow measurement, providing field proven reliability.
Rosemount 2051 Pressure Transmitters
The Rosemount 2051 provides a reliable differential, gage, and absolute pressure measurement with a variety of output protocols, materials and process connections.
Rosemount 2088 Gage & Absolute Pressure Transmitters
The Rosemount 2088 is a highly reliable and accurate transmitter in a lightweight, compact package.
Rosemount 2090P Pulp & Paper Transmitters
The Rosemount 2090P utilizes industry-leading solid state, polysilicon sensor for reliability and industry-leading accuracy.
Rosemount 2090F Hygienic Transmitters
The Rosemount 2090F utilizes industry-leading solid state, polysilicon sensor for reliability and industry-leading accuracy.
Rosemount 4600 Panel Mount Transmitters
The Rosemount 4600 is a compact, reliable transmitter designed to meet your panel mount pressure measurement needs.
3051S Wireless 
3051S MultiVariable
3051S Advanced Diagnostics
3051S ERS System
Explore the 3051S
DP Flow Capabilities
DP Level Capabilities
Rosemount 3051 Transmitter
With its time-tested reliability and over 4 million installations, the Rosemount 3051 is more than field proven – it is the Industry Standard.
The Rosemount 3051 delivers unparalleled reliability, performance and safety to increase your plant profitability. Better measurement means a stronger bottom line. The comprehensive offering enhances your pressure, level and flow applications from simple measurement to stringent SIL2 safety compliance.
Rosemount 3051 Pressure Transmitter
- The Industry Standard in Performance and Reliability
The 3051C coplanar sensor delivers best in class performance in over 4 million around the world
- Fully Integrated Pressure, Level Flow Solutions
The flexible Coplanar design provides out of the box read solutions to eliminate on-site assembly, testing and calibration
- Seemless Integration with any Host
Offering a full suite of protocols that include 4-20mA HART FOUNDATION Fieldbus Profibus PA and 1.5Vdc HART Low Power with the latest Enhanced DD or DTM
- Easy to use LCD Display
The five character fully configurable LCD displays process variable, percent of range and diagnostic messages
Rosemount country of origin
On Rosemount , have 3 manufacture lines in the world wide.
One is in USA, one is in Singapore, another is in Beijing China.
As usually Rosemount Beijing is making 3051 Rosemount and some Rosemount 3051s and some Rosemount 3144P and Rosemount 2051 and some Rosemount 2088 series transmitters.
Consider we are in local Beijing. We would like to sell the Rosemount transmitter made by Beijing Rosemount…..is also valid for world wide.
All the parts we sold are 100% brand new. Sure all the parts can get warranty in China Beijing side.
Since we start the Rosemount business, we got many customers from Turkey , Vietnam , U.A.E. , Dubai, Qatar, Indonesia , Thailand, Philippines , Nigeria ……
The right Pictures can show you the real goods station of Rosemount 3051S … Original Packing and inside the box station…. Made by China Rosemount (Beijing Manufacturer…) Rosemount transmitter, Rosemount 3051 is best transmitter.
Rosemount 3051 Transmitter Rosemount 3051 Transmitter Rosemount 3051 Transmitter Rosemount 3051 Transmitter
Rosemount™ 3051 Pressure Transmitter
With the Rosemount 3051 Pressure Transmitter, you’ll gain more control over your plant. You’ll be able to reduce product variation and complexity as well as your total cost of ownership by leveraging one device across a number of pressure, level and flow applications. You’ll have access to information you can use to diagnose, correct and even prevent issues. And with unparalleled reliability and experience, the Rosemount 3051 is the industry standard that will help you perform at higher levels of efficiency and safety so you can remain globally competitive.
Rosemount 3051 Pressure Transmitter Contents
Industry leading capabilities extended to IEC 62591
Cost effectively implement wireless on the industry’s most proven platform
Optimize safety with the industry’s only intrinsically safe power module
Eliminate wiring design and construction complexities to lower costs by 40–60 percent
Quickly deploy new pressure, level and flow measurements in 70 percent less time
Innovative, integrated DP Flowmeters
Fully assembled, configured, and leak tested for out-of-the-box installation
Reduce straight pipe requirements, lower permanent pressure loss and achieve accurate
measurement in small line sizes
Up to 1.65 percent volumetric flow accuracy at 8:1 turndown
Proven, reliable, and innovative DP Level Technologies
Connect to virtually any process with a comprehensive offering of process connections, fill
fluids, direct mount or capillary connections and materials
Quantify and optimize total system performance with QZ option
Operate at higher temperature and in vacuum applications
Optimize level measurement with cost efficient Rosemount Tuned-System™ Assemblies
Instrument manifolds – quality, convenient, and easy
Designed and engineered for optimal performance with Rosemount transmitters
Save installation time and money with factory assembly
Offers a variety of styles, materials and configurations
Setting the standard for pressure measurement
Proven best-in-class performance,reliability and safety
Over seven million installed
Reference accuracy 0.04 percent of span
Installed total performance of 0.14 percent of span
10-year stability of 0.2 percent of URL
SIL2/3 certified (IEC 61508)
Maximize installation and application flexibility with the coplanar platform
Improve reliability and performance with integrated DP
Flowmeters, DP Level solutions and integral manifolds
Easy installation with all solutions fully assembled, leak-tested
and calibrated
Meet your application needs with an unsurpassed offering
Advanced functionality
Power advisory diagnostics
Detect on-scale failures caused by electrical loop issues before they impact your process
operation
This capability is safety certified for your most critical applications
Local operator interface (LOI)Straightforward menus and built-in configuration buttons allow you commission the device in
less than a minute
Configure in hazardous-area locations without removing the transmitter cover using external
buttons
Advanced functionality
Power advisory diagnostics
Detect on-scale failures caused by electrical loop issues before they impact your process
operation
This capability is safety certified for your most critical applications
Local operator interface (LOI)
Straightforward menus and built-in configuration buttons allow you commission the device in
less than a minute
Configure in hazardous-area locations without removing the transmitter cover using external
buttons
Rosemount 3051 model selection
|
|
|
|
||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
|||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
|
Rosemount 3051 | ||||
|
|
Rosemount 3051 | |||||
| Rosemount 3051 | |||||||
Rosemount Pressure Transmitters
Rosemount 1056 Dual-Input Intelligent Analyzer
Rosemount 1056 Intelligent Analyzer
Multiparameter instrument – single or dualinput. Choose from pH/ORP ISE, Resistivity/Conductivity, % Concentration, Chlorine, Oxygen,Ozone, Temperature, Turbidity, Flow,and 420 mA Current Input.
Large display – large easy-to-read process measurements.
Easy to install – modular boards, removable connectors, easy to wire power, sensors, and outputs.
Intuitive menu screens – with advanced diagnostics and help screens.
Seven languages included: English, French,German, Italian, Spanish, Portuguese,and Chinese.
HART® and PROFIBUS® DP Dig
Rosemount 1056 Analyze
Features and Applications
The Rosemount 1056 dual-input analyzer offers single or dualsensor input with an unrestricted choice of dual measurements.This multi-parameter instrument offers a wide range of measurement choices supporting most industrial, commercial,and municipal applications. The modular design allows signal input boards to be field replaced making configuration changes easy. Conveniently, live process values are always displayed during programming and calibration routines.
Quick Start Programming
Exclusive Quick Start screens appear the first time the Rosemount 1056 is powered. The instrument autorecognizes
each measurement board and prompts the user to configure each sensor loop in a few quick steps for immediate
deployment.
Digital Communications
HART® and Profibus® DP digital communications are available.The 1056 HART units communicate with the 375 HART®handheld communicator and HART hosts, such as AMS Intelligent Device Manager. Thel 1056 Profibus units are fully compatible with Profibus DP networks and Class 1 or Class 2 masters. HART and Profibus DP configured units will support any single or dual measurement configurations of 1056.
Menus
Menu screens for calibrating and programming are simple and intuitive. Plain language prompts and help screens guide the user through these procedures. Dual Sensor Input and Output The Rosemount 1056 accepts single or dual sensor input.Standard 0/4–20 mA current outputs can be programmed to correspond to any measurement or temperature.
Enclosure The instrument fits standard ½ DIN panel cutouts. The versatile enclosure design supports panelmount, pipemount, and surface/wallmount installations.
Isolated Inputs
Inputs are isolated from other signal sources and earth ground.This ensures clean signal inputs for single and dual input
configurations. For dual input configurations, isolation allows any combination of measurements and signal inputs without cross-talk or signal interference.
Temperature
Most measurements require temperature compensation. The Model 1056 will automatically recognize Pt100, Pt1000 or 22k NTC RTDs built into the sensor.
Current Outputs
Two 4–20 mA or 0–20 mA current outputs are electrically isolated. Outputs are fully scalable and can be programmed to linear or logarithmic modes. Output dampening can be enabled with time constants from 0 to 999 seconds. Output 1 includes digital signal 4–20 mA superimposed HART® (option HT only).
Security Access Codes
Two levels of security access are available. Program one access
code for routine calibration and hold of current outputs;
program another access code for all menus and functions.
Information about each condition
is quickly accessible by pressing
DIAG on the keypad. User help
screens are displayed for most
fault and warning conditions to
assist in trouble shooting.
Display
The highcontrast LCD provides live measurement readouts in large digits and shows up to four additional process variables or diagnostic parameters. The display is backlit and the format can be customized to meet user requirements.
Local Languages
Rosemount extends its worldwide reach by offering seven local languages – English, French, German, Italian, Spanish,
Portuguese, and Chinese. Every unit includes user programming menus; calibration routines; faults and warnings; and user help screens in all seven languages. The displayed language can be easily set and changed using the menus.
Specifications
General
Enclosure: Polycarbonate. Type 4X, IP65.
Dimensions: Overall 155 x 155 x 131mm
(6.10 x 6.10 x 5.15 in.). Cutout: 1/2 DIN 139mm x 139mm
(5.45 x 5.45 in.)
Conduit Openings: Accepts 1/2” or PG13.5 conduit fittings
Display: Monochromatic graphic liquid crystal display.
128 x 96 pixel display resolution. Backlit. Active display
area: 58 x 78mm (2.3 x 3.0 in.).
Ambient Temperature and Humidity: 0 to 55 °C
(32 to 131 °F). Turbidity only: 0 to 50 °C (32 to 122 °F)
Hazardous Location Approvals Options for CSA:
01, 02, 03, 20, 21, 22, 24, 25, 26, 27, 30, 31, 32, 34, 35,
36, 37, 38, AN, and HT.
Class I, Division 2, Groups A, B, C, & D
Class II, Division 2, Groups E, F, & G
Class III T4A Tamb= 50°C
Class I, Division 2, Groups A, B, C, & D
Class II & III, Division 2, Groups E, F, & G
T4A Tamb= 50°C Enclosure Type 4X
Evaluated to the ANSI/UL Standards. The ‘C’ and ‘US’ indicators
adjacent to the CSA Mark signify that the product has been
evaluated to the applicable CSA and ANSI/UL Standards, for use
in Canada and the U.S. respectively.
Options for UL: 01, 02, 03, 20, 21, 22, 24, 25, 26, 27, 30, 31, 32,
34, 35, 36, 37, 38, AN, and HT.
Options for CSA: -01, 02, 03, 20, 21, 22, 24, 25, 26, 27, 30, 31,
32, 34, 35, 36, 37, 38, AN, and HT.
NOTE: Turbidity configurations (Models 1056-02-27-38-AN/-
HT, 1056-03-27-38-AN/-HT, 1056-02-27-37-AN/-HT and
1056-03-27-37-AN/-HT) are FM approved Class I Div.2 for
hazardous area installation.
Class I, Division 2, Groups A, B, C, & D
Class II & III, Division 2, Groups E, F, & G
T4A Tamb= 50°C Enclosure Type 4X
Options for UL: 01, 02, 03, 20, 21, 22, 24, 25, 26, 27, 30, 31, 32,
34, 35, 36, 37, 38, AN, and HT.
Performance Specifications
Recommended Range – Contacting Conductivity
Recommended Range – Toroidal Conductivity
Quick Start Guide
