PRO-FACE HMI AGP3550-T1-AF Original new in Box

PRO-FACE HMI AGP3550-T1-AF Original new in Box

Model Number:

Product Type:

Type:

Category:

Plance of Origin:

Warranty:

Description:  

Display Type
TFT Color LCD
Display Size
10.4″
Resolution
640 x 480 pixels (VGA)
Dot pitch
W0.33 x H0.33 mm [W0.01 x H0.01 in.]
Effective Display Area
W211.2 X H158.4mm [W8.31 X H6.24in.]
Display Colors
65,536 Colors (No blink)/16,384 Colors (Blink)
Backlight
CCFL (Replaceable)
Brightness Control
8 Levels (Adjusted with the touch panel)
Contrast Control
Not applicable
Backlight Service Life
50,000 hrs. or more (continuous operation at 25°C before backlight brightness decreases to 50% or backlight starts to blink)
Language Fonts
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font Sizes
Standard font: Width can be expanded up to 8 times., Height can be expanded up to 8 times.
8 x 16 dots
80 char. x 30 rows
16 x 16 dots
40 char. x 30 rows
32 x 32 dots
20 char. x 15 rows
8 x 8 dots
80 char. x 60 rows
Program Area
FLASH EPROM 132 KB
Number of Step
Equivalent to 15,000 steps*1
Variable Area
SRAM 64 KB (uses lithium battery)*2
Application Memory
FLASH EPROM 10 MB*3
Data Backup
SRAM 320KB (uses lithium battery)*4
Clock Accuracy
65 sec/month (deviation at room temperature and power is OFF)*5
Touch Panel Type
Resistive Film (analog)
Touch Panel Resolution
1,024 X 1,024
Touch Panel Service Life
1,000,000 times or more
Serial (COM1)
RS-232C/422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
Serial (COM2)
RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI), Connector: D-Sub9 (socket)
Ethernet (LAN)
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45)×1
Expansion Unit 1
Communication Expansion Unit x 1
Expansion Unit 2
VM/DVI Input Expansion Unit x 1
USB (TYPE-A)
Conforms to USB1.1 (TYPE-A) x 2, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
Expansion Memory
Function Expansion Memory x 1 (on internal circuit board)
CF Card
Compact Flash CF Card Slot (TYPE-II) X 1
Video Input
NTSC: 59.9Hz, PAL: 50Hz, SECAM: 50Hz, Connector: RCA 75Ω X 1
Sound Input
MIC or LINE input (software switch), Connector: MINI-JACK Φ3.5 X 1
Sound Output
Speaker Output, 70mW (Rated Load: 8Ω, Frequency: 1kHz), Connector: 2-piece terminal block (AUX) X 1
AUX Input/Output
Alarm Output, RUN Output, Buzzer Output, Rated Voltage: DC24V, Rated Current: 50mA, Remote Reset Input, Input Voltage: DC24V, Connector: 2-piece terminal block (AUX) X 1

1Up to 60,000 steps can be converted in software. However, this reduces internal memory capacity (for screen data) by 1 MB.

2A Lithium battery’s lifetime is:
10 years when the battery’s ambient temperature is 40 oC or less.
4.1 years when the battery’s ambient temperature is 50 oC or less.
1.5 years when the battery’s ambient temperature is 60 oC or less.
When used for back up: Approximately 100 days, with a fully charged battery.
Approximately 6 days, with a half-charged battery.

3Capacity available for user application. 8 MB available if GP-Pro EX Ver. 2.5 or earlier is used.

4A Lithium battery’s lifetime is:
10 years when the battery’s ambient temperature is 40 oC or less.
4.1 years when the battery’s ambient temperature is 50 oC or less.
1.5 years when the battery’s ambient temperature is 60 oC or less.
When used for back up: Approximately 100 days, with a fully charged battery.
Approximately 6 days, with a half-charged battery.

5Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.