6AG1153-2BA02-7XB0 SIPLUS ET 200M IM 153-2

6AG1153-2BA02-7XB0 SIPLUS ET 200M IM 153-2

Model Number:

Product Type:PLC I/O Module

Type:a:1:{i:0;s:20:”Wind power equipment”;}

Category:Home/Siemens/PLC/ET200

Plance of Origin:Made in Germany

Warranty:All the Parts one year warranty

Description:SIPLUS ET 200M IM 153-2 (*BA02) -40…+70°C start up temperature: -25°C with conformal coating based on 6ES7153-2BA02-0XB0 Connection ET 200M for max. 12 S7-300 modules with redundancy capability, Timestamping suitable for isochronous mode Operation New features: up to 12 modules can be used Slave Initiative for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals/slot  

***Spare part*** SIPLUS ET 200M IM 153-2 (*BA02) -40…+70°C start up temperature: -25°C with conformal coating based on 6ES7153-2BA02-0XB0 Connection ET 200M for max. 12 S7-300 modules with redundancy capability, Timestamping suitable for isochronous mode Operation New features: up to 12 modules can be used Slave Initiative for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals/slot

6AG1153-2BA02-7XB0_datasheet_en

General information
Product type designation IM 153-2 DP ST
Vendor identification (VendorID) 801Eh
Supply voltage
Rated value (DC)
● 24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
external protection for power supply lines (recommendation) 2,5 A
Mains buffering
● Mains/voltage failure stored energy time 5 ms
Input current
Current consumption, max. 600 mA
Inrush current, typ. 3 A
I²t 0.1 A²·s
Output voltage
Rated value (DC) 5 V
Output current
for backplane bus (5 V DC), max. 1.5 A
Power loss
Power loss, typ. 5.5 W
Address area
Addressing volume
● Inputs 244 byte
● Outputs 244 byte
Hardware configuration
Number of modules per DP slave interface, max. 12
Time stamping
Accuracy 1 ms; 1ms at up to 8 modules; 10ms at up to 12 modules
Number of message buffers 15
Messages per message buffer 20
Number of stampable digital inputs, max. 128; Max. 128 signals/station; max. 32 signals/slot
Time format RFC 1119
Time resolution 0.466 ns
Time interval for transmitting the message buffer if a message is present 1 000 ms
Time stamp on signal change rising / falling edge as signal entering or exiting
Interfaces
Transmission procedure RS 485