Siemens CU310 DP single-axis control unit 6SL3040-0LA00-0AA1

Siemens CU310 DP single-axis control unit 6SL3040-0LA00-0AA1

Model Number:

Product Type:PLC Module

Type:

Category:

Plance of Origin:Made in Germany

Warranty:All the Parts one year warranty

Description:Siemens CU310DP single-axis control unit 6SL3040-0LA00-0AA1 Sinamics S120 single-axis drive control unit with Profi bus-DP interface  

Siemens CU310DP single-axis control unit 6SL3040-0LA00-0AA1 Sinamics S120 single-axis drive control unit with Profi bus-DP interface

Siemens CU310DP Siemens S120 single axis control unit CU310DP

Product order number: 6SL3040-0LA00-0AA1

Siemens CU310DP Siemens S120 single axis control unit CU310DP

description:

Siemens CU310DP single-axis control unit 6SL3040-0LA00-0AA1 Sinamics S120 single-axis drive control unit with Profi bus-DP interface

product description
SINAMICS S120 CONTROL UNIT CU310 DP WITH PROFIBUS INTERFACE WITHOUT COMPACTFLASH CARD
, CU310DP is the drive is connected to the upper controller through Profibus-DP

General technical parameters

Incoming line voltage

(Under 2000m above sea level)

1 phase. 200 V-240 V AC ±10% (-15% <1 minute)

3-phase. 380 V-480 V AC ±10% (-15% <1 minute)

The DC bus pre-charging frequency is as large as 1x30s

Grid frequency 47 Hz-63 Hz DC bus voltage about 1.35 x incoming line voltage

Power factor (fundamental wave) >0.96 Control power supply 24 V DC, -15/+20%

Installation altitude Normal altitude ≤1000m. Derate the output when the altitude is 1000m-4000m. Cooling type Integrated internal fan

The ambient temperature is normally 0-40°C. When the temperature is between 40°C and 55°C, derating is required.

Output frequency range 1) Servo control mode: 0 Hz-650 Hz. 2) Vector control mode: 0 Hz-300 Hz. 3) V/F control mode: 0 Hz-300 Hz.

Radio interference suppressor 1) Standard: No. 2) When there is an incoming line filter: Comply with EN55011 Class A1 to and EN61800-3 Class C2.